| |
Odd characters? Click here for help. A
version of this specification with the linedraw characters
approximated by text is available by clicking here.
SEAGATE TECHNOLOGY, INC.
1-800-SEAGATE
http://www.seagate.com
(C)opyright 1991
ST-412 ST412 MFM
OPTION SHUNT BLOCK
ÚÄÄ\ÄÄÄ/ÄÄ¿
1 ³ R ³ 16
2 ³ NC ³ 15
3 ³ NC ³ 14
4 ³ NC ³ 13
5 ³ DS4 ³ 12
6 ³ DS3 ³ 11
7 ³ DS2 ³ 10
8 ³ DS1 ³ 9
ÀÄÄÄÄÄÄÄÄÄÙ
DS1,DS2,DS3,DS4=DRIVE SELECTED
R=RADIAL OPERATION
ST - 412
UNFORMATTED CAPACITY (MB) ________________12.76
FORMATTED CAPACITY (17 SECTORS) (MB) _____10.0
ACTUATOR TYPE ____________________________STEPPER
TRACKS ___________________________________1,224
CYLINDERS ________________________________306
HEADS ____________________________________4
DISCS ____________________________________2
MEDIA TYPE _______________________________OXIDE
RECORDING METHOD _________________________MFM
TRANSFER RATE (mbits/sec) ________________5.0
INTERFACE ________________________________ST412
TPI (TRACKS PER INCH) ____________________345
BPI (BITS PER INCH) ______________________9,074
AVERAGE ACCESS (ms) ______________________85
SINGLE TRACK SEEK (ms) ___________________< 16.67
MTBF (power-on hours) ____________________11,000
POWER REQUIREMENTS: +12V START-UP (amps) _3.5
+12V TYPICAL (amps) __1.7
+5V TYPICAL (amps) ___1.1
TYPICAL (watts) ______25.9
MAXIMUM (watts) ______50
BUFFERED STEP PULSE RATE (micro sec) _____5-500
WRITE PRECOMP (cyl) ______________________128
REDUCED WRITE CURRENT (cyl) ______________N/A (307)
LANDING ZONE (cyl)________________________319
IBM AT DRIVE TYPE ________________________1
Seagate reserves the right to change, without notice, product
offerings or specifications. (6/26/90)
A copy of this specification file may be obtained
by FTP at
ftp://ftp.seagate.com/techsuppt/mfm/st412.txt.
 |
|
