| |
Odd characters? Click here for help. A
version of this specification with the linedraw characters
approximated by text is available by clicking here.
SEAGATE TECHNOLOGY, INC.
1-800-SEAGATE
http://www.seagate.com
(C)opyright 1999
ST-39103FC Fibre Channel FC-AL, Dual Port (Cheetah 18 LP)
ÉÍÍÍÍÍÍÍÍÍÍÍ»
º REAR VIEW º ST-39103FC
ÈÍÍÍÍÍÍÍÍÍÍͼ
40 pin I/O and DC Power Wall/bracket Connection
³ Female
J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄ\ TOP (HDA)
ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ
(\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄ20/) BOTTOM
Notes on 40 pin I/O connector:
+12v = pins 2, 3, 4, 21
+5v = pins 19, 20, 40
GND = pins 6, 22, 23, 26, 29, 32, 35
Mating FC connector: AMP US p/n: 787317-1 straight-in, Male 40-pin
ÉÍÍÍÍÍÍÍÍÍÍÍÍ»
º FRONT VIEW º (ST-39103FC)
ÈÍÍÍÍÍÍÍÍÍÍÍͼ
Reserved. Shipped with cover installed.
Do not remove. Do not install jumpers
³ ÚÂÄÄÄÄ Reserved
³ ³³ÚÄÄÄ Fault LED
³ ³³³ÚÄÄ Port B Bypass LED
³ ³³³³ÚÄ Port A Bypass LED
TOP (HDA) ÕØÍÍ͸ ³³³³1
ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ
* BOTTOM ÔÍÍÍ;³³³ÀÅÙ
³ J6 ³³³ ÀÄÄ Ground
LED ÄÙ ³³ÀÄÄÄÄ Active LED
³ÀÄÄÄÄÄ Ground
ÀÄÄÄÄÄÄ Remote LED (pin-11 +5v)
ST39103FC drives have two independent FC-AL ports. These
ports may be connected on independent loops or on the same
loop. Port A and Port B may be connected in any order or
combination.
ST-39103FC
UNFORMATTED CAPACITY (GB) ________________10.8
FORMATTED CAPACITY (GB) __________________9.105
AVERAGE SECTORS PER TRACK ________________303 rounded down
ACTUATOR TYPE ____________________________ROTARY VOICE COIL
TRACKS ___________________________________58,806
CYLINDERS ________________________________9,801 user
HEADS ______PHYSICAL______________________6
DISCS (3.0 in) ___________________________3
MEDIA TYPE _______________________________THIN FILM/MR
RECORDING METHOD _________________________PRML 16/17 EPR4
INTERNAL TRANSFER RATE (mbits/sec)________193 to 308
INTERNAL FORMATTED TRANSFER RATE (MB/sec)_16.2 to 28.3
EXTERNAL TRANSFER RATE (mbyte/sec/port)___106.3 Sync
SPINDLE SPEED (RPM) ______________________10,016
AVERAGE LATENCY (mSEC) ___________________2.99
BUFFER (/optional)________________________1024/2048 KByte
Read Look-Ahead, Adaptive,
Multi-Segmented Cache
INTERFACE ________________________________FC-AL
Fibre Channel - Arbitrated Loop, ASA II
BYTES PER TRACK __________________________153,284-229,045
SECTORS PER DRIVE ________________________17,783,240
TPI (TRACKS PER INCH) ____________________12,580
BPI (PEAK KBITS PER INCH) ________________252
AVERAGE ACCESS (ms read/write)____________5.4/6.0
Drive level without controller overhead
SINGLE TRACK SEEK (ms read/write) ________0.7/0.9
MAX FULL SEEK (ms read/write) ____________12.2/13.2
MTBF (power-on hours) ____________________1,000,000
SHOCK (G's, 11/2/.5 ms):
operating (Read/Write) __________5
abnormal ________________________10
nonoperating ____________________75/175/100
ACOUSTICS (Bels typical, sound power) ____4.3
POWER DISSIPATION (watts/BTUs) Active ____/
Idle ______7.63/26
POWER REQUIREMENTS: +12V START-UP (amps) _2.2
+12V TYPICAL (amps) __0.34 idle
+5V START-UP (amps) __0.94
+5V TYPICAL (amps) ___0.71 idle
IDLE (watts) _________
LANDING ZONE (cyl) _______________________AUTO PARK
IBM AT DRIVE TYPE ________________________0 or NONE
Physical:
Height (inches/mm): 1.0/25.4
Width (inches/mm): 4.00/101.6
Depth (inches/mm): 5.75/146
Weight (lbs/kg): 1.2/0.544
Already low-level formatted at the factory with x spare sectors at
the end of each x cylinder region.
ZBR = Zone Bit Recording = Variable sectors per track
Seagate reserves the right to change, without notice, product
offerings or specifications. (03/24/99)
A copy of this specification file may be obtained
by FTP at
ftp://ftp.seagate.com/techsuppt/fibre_channel/ST39103F.TXT.
 |
|