Odd characters? Click here for help. A version of this specification with the linedraw characters approximated by text is available by clicking here.

                         SEAGATE TECHNOLOGY, INC.
                              1-800-SEAGATE
                          http://www.seagate.com
                            (C)opyright 1999


ST-150176FC Fibre Channel FC-AL, Dual Port (Barracuda 50)

  ÉÍÍÍÍÍÍÍÍÍÍÍ»
  º REAR VIEW º  ST-150176FC
  ÈÍÍÍÍÍÍÍÍÍÍͼ
       40 pin I/O and DC Power Wall/bracket Connection
                     ³  Female
    J1          /ÄÄÄijÄÄÄÄÄÄÄÄÄ\      TOP (HDA)
     ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ
              (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄ20/)    BOTTOM

     Notes on 40 pin I/O connector:
            +12v  =  pins  2, 3, 4, 21
            +5v   =  pins  19, 20, 40
            GND   =  pins  6, 22, 23, 26, 29, 32, 35

  Mating FC connector: AMP US p/n: 787317-1 straight-in, Male 40-pin


  ÉÍÍÍÍÍÍÍÍÍÍÍÍ»
  º FRONT VIEW º  (ST-150176FC)
  ÈÍÍÍÍÍÍÍÍÍÍÍͼ

Reserved. Shipped with cover installed.
Do not remove. Do not install jumpers
                                  ³     ÚÂÄÄÄÄ Reserved
                                  ³     ³³ÚÄÄÄ Fault LED
                                  ³     ³³³ÚÄÄ Port B Bypass LED
                                  ³     ³³³³ÚÄ Port A Bypass LED
                      TOP (HDA)  ÕØÍÍ͸ ³³³³1
     ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ
                 *    BOTTOM     ÔÍÍÍ;³³³ÀÅÙ
                 ³               J6    ³³³ ÀÄÄ Ground
            LED ÄÙ                     ³³ÀÄÄÄÄ Active LED
                                       ³ÀÄÄÄÄÄ Ground
                                       ÀÄÄÄÄÄÄ Remote LED (pin-11 +5v)

  ST150176FC drives have two independent FC-AL ports. These
  ports may be connected on independent loops or on the same
  loop.  Port A and Port B may be connected in any order or
  combination.


                            ST-150176FC


       UNFORMATTED CAPACITY (GB) ________________63.1
       FORMATTED CAPACITY (GB) __________________50.01
       AVERAGE SECTORS PER TRACK ________________369 rounded down
       ACTUATOR TYPE ____________________________ROTARY VOICE COIL
       TRACKS ___________________________________264,528
       CYLINDERS ________________________________12,024 user
       HEADS ______PHYSICAL______________________22
       DISCS (3.5 in) ___________________________11
       MEDIA TYPE _______________________________THIN FILM/MR
       RECORDING METHOD _________________________PRML 8/9 EPR4
       INTERNAL TRANSFER RATE (mbits/sec)________153 to 264
       INTERNAL FORMATTED TRANSFER RATE (MB/sec)_19.1 to 33.0
       EXTERNAL TRANSFER RATE (mbyte/sec/port)___106.3 Sync
       SPINDLE SPEED (RPM) ______________________7,184
       AVERAGE LATENCY (mSEC) ___________________4.17
       BUFFER (/optional) _______________________1MB/4MB
         Read Look-Ahead, Adaptive,
         Multi-Segmented Cache
       INTERFACE ________________________________FC-AL 
         Fibre Channel - Arbitrated Loop, ASA II
       BYTES PER TRACK __________________________189.28 KB avg
       SECTORS PER DRIVE ________________________97,693,755
       TPI (TRACKS PER INCH) ____________________12,905
       BPI (KBITS PER INCH) _____________________252
       AVERAGE ACCESS (ms read/write)____________7.6/8.4
         Drive level with controller overhead
       SINGLE TRACK SEEK (ms read/write) ________0.9/1.2
       MAX FULL SEEK (ms read/write) ____________16/17
       MTBF (power-on hours) ____________________1,000,000
       SHOCK (G's, 11/2/0.5 ms):
                operating (Read/Write) __________5
                abnormal ________________________10
                nonoperating ____________________50/150/45
       ACOUSTICS (Bels typical, sound power) ____4.0
       POWER DISSIPATION (watts/BTUs) Active ____/
                                      Idle ______13.67/46.6
       POWER REQUIREMENTS: +12V START-UP (amps) _2.66
                           +12V TYPICAL (amps) __1.08 idle
                           +5V START-UP (amps) __1.1
                           +5V TYPICAL (amps) ___1.1 idle
                           IDLE (watts) _________
       LANDING ZONE (cyl) _______________________AUTO PARK
       IBM AT DRIVE TYPE ________________________0 or NONE

       Physical:
                        Height (inches/mm):     1.62/41.1
                        Width  (inches/mm):     4.00/101.6
                        Depth  (inches/mm):     5.75/146.1
                        Weight    (lbs/kg):      2.2/0.99

Already low-level formatted at the factory with x spare sectors
per cylinder and x spare cylinder per unit.

ZBR = Zone Bit Recording = Variable sectors per track

Seagate reserves the right to change, without notice, product 
offerings or specifications. (11/13/99)

A copy of this specification file may be obtained by FTP at
ftp://ftp.seagate.com/techsuppt/fibre_channel/ST150176.FC.