| |
Odd characters? Click here for help. A
version of this specification with the linedraw characters
approximated by text is available by clicking here.
SEAGATE TECHNOLOGY LLC
1-800-SEAGATE
http://www.seagate.com
(C)opyright 2002
ST-1181677FC Fibre Channel FC-AL, Dual Port (Barracuda 180)
ÉÍÍÍÍÍÍÍÍÍÍÍ»
º REAR VIEW º ST-1181677FC
ÈÍÍÍÍÍÍÍÍÍÍͼ
40 pin I/O and DC Power Wall/bracket Connection
³ Female
J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄ\ TOP (HDA)
ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ
(\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄ20/) BOTTOM
Notes on 40 pin I/O connector:
+12v = pins 2, 3, 4, 21
+5v = pins 19, 20, 40
GND = pins 6, 22, 23, 26, 29, 32, 35
Mating FC connector: AMP US p/n: 787317-1 straight-in, Male 40-pin
ÉÍÍÍÍÍÍÍÍÍÍÍÍ»
º FRONT VIEW º (ST-1181677FC)
ÈÍÍÍÍÍÍÍÍÍÍÍͼ
Reserved. Shipped with cover installed.
Do not remove. Do not install jumpers
³ ÚÂÄÄÄÄ Reserved
³ ³³ÚÄÄÄ Fault LED
³ ³³³ÚÄÄ Port B Bypass LED
³ ³³³³ÚÄ Port A Bypass LED
TOP (HDA) ÕØÍÍ͸ ³³³³1
ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ
* BOTTOM ÔÍÍÍ;³³³ÀÅÙ
³ J6 ³³³ ÀÄÄ Ground
LED ÄÙ ³³ÀÄÄÄÄ Active LED
³ÀÄÄÄÄÄ Ground
ÀÄÄÄÄÄÄ Remote LED (pin-11 +5v)
ST1181677FC drives have two independent FC-AL ports. These
ports may be connected on independent loops or on the same
loop. Port A and Port B may be connected in any order or
combination.
ST-1181677FC
UNFORMATTED CAPACITY (GB) ________________241.9
FORMATTED CAPACITY (GB) __________________181.55
AVERAGE SECTORS PER TRACK ________________609 rounded down
ACTUATOR TYPE ____________________________ROTARY VOICE COIL
TRACKS ___________________________________581,928
CYLINDERS ________________________________24,247 user
HEADS ______PHYSICAL______________________24
DISCS (3.3 in) ___________________________12
MEDIA TYPE _______________________________THIN FILM/MR
RECORDING METHOD _________________________PRML 8/9 EPR4
INTERNAL TRANSFER RATE (mbits/sec)________282 to 508
INTERNAL FORMATTED TRANSFER RATE (MB/sec)_25.3 to 47.0
EXTERNAL TRANSFER RATE (mbyte/sec/port)___106 Sync
SPINDLE SPEED (RPM) ______________________7,200
AVERAGE LATENCY (mSEC) ___________________4.17
BUFFER (/optional FCV) ___________________4MB/16MB
Read Look-Ahead, Adaptive,
Multi-Segmented Cache
INTERFACE ________________________________FC-AL
Fibre Channel - Arbitrated Loop, ASA II
BYTES PER TRACK __________________________406,071 avg
SECTORS PER DRIVE ________________________354,600,001
TPI (TRACKS PER INCH) ____________________31,200
BPI (KBITS PER INCH) _____________________490
AVERAGE ACCESS (ms read/write)____________7.4/8.2
Drive level with controller overhead
SINGLE TRACK SEEK (ms read/write) ________0.8/1.1
MAX FULL SEEK (ms read/write) ____________16/17
MTBF (power-on hours) ____________________1,200,000
SHOCK (G's, 11/2/.5 ms):
operating (Read/Write) __________10
abnormal ________________________40
nonoperating ____________________75/150/80
ACOUSTICS (Bels typical, sound power) ____3.7
POWER DISSIPATION (watts/BTUs) Active ____/
Idle ______10.3/35.18
POWER REQUIREMENTS: +12V START-UP (amps) _1.34
+12V TYPICAL (amps) __0.53 idle
+5V START-UP (amps) __0.87
+5V TYPICAL (amps) ___0.76 idle
IDLE (watts) _________
LANDING ZONE (cyl) _______________________AUTO PARK
IBM AT DRIVE TYPE ________________________0 or NONE
Physical:
Height (inches/mm): 1.6/40.64
Width (inches/mm): 4.00/101.6
Depth (inches/mm): 5.75/146.1
Weight (lbs/kg): 2.3/1.043
Already low-level formatted at the factory with x spare sectors
per cylinder and x spare cylinder per unit.
ZBR = Zone Bit Recording = Variable sectors per track
Seagate reserves the right to change, without notice, product
offerings or specifications. (10/09/2002)
A copy of this specification file may be obtained
by FTP at
ftp://ftp.seagate.com/techsuppt/fibre_channel/ST118167.7FC.
 |
|