| |
Odd characters? Click here for help. A
version of this specification with the linedraw characters
approximated by text is available by clicking here.
SEAGATE TECHNOLOGY, INC.
1-800-SEAGATE
http://www.seagate.com
(C)opyright 1991
ST-2106E (94216-106) Wren 3 HH ESDI
ÚÄ Test Seek
³
Terminator o o o o Ú12ÄGÄGÄ5Ä¿
ÚÄÄ ÚÄÄÄÄÄÄÄÄÄ1 o o o o ³ 0 0 0 0 ³
³ ÀÄÄÄÄÄÄÄÄÄÙ T 4 2 1 \Ä1Ä2Ä3Ä4Ä/
³ ÍÍÍÍÍÍÍÍ ÍÍ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÍÍ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
³ À Data Cable À Controller À Drive Select
³
ÀÄ Note: Config header located on left rear of drive.
ÚÄÄÄÄÄÄÄÄÄÄÄ Motor Start option enable (closest pair
M S S S of pins to front of drive).
³ ³ o o o o
B/Sec ³ Sectors ³ o o o o
ÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍ
256 ³ 64 ³ 0 0 0 0=open
512 ³ 35 ³ 1 0 0 = 91,750,400 1=closed
512 ³ 36 ³ 0 1 0 = 94,371,840
512 ³ 34 ³ 1 1 0 = 89,128,960
1024 ³ 19 ³ 1 0 1
³ Add/Mark³ 1 1 1
ST-2106E
94216-106 WREN 3 HH
UNFORMATTED CAPACITY (MB) ________________106
FORMATTED CAPACITY (34 SECTORS) (MB) _____89
ACTUATOR TYPE ____________________________VOICE COIL
TRACKS ___________________________________5,120
CYLINDERS ________________________________1,024
HEADS ____________________________________5
DISCS ____________________________________3
MEDIA TYPE _______________________________THIN FILM
RECORDING METHOD _________________________RLL (2,7)
TRANSFER RATE (mbytes/sec) _______________1.25
SPINDLE SPEED (RPM) ______________________3,600
AVERAGE LATENCY (mSEC) ___________________8.33
INTERFACE ________________________________ESDI
TPI (TRACKS PER INCH) ____________________960
BPI (BITS PER INCH) ______________________19,058
AVERAGE ACCESS (ms) ______________________18
SINGLE TRACK SEEK (ms) ___________________4
MAX FULL SEEK (ms) _______________________35
MTBF (power-on hours) ____________________100,000
POWER REQUIREMENTS: +12V START-UP (amps) _4.5
+12V TYPICAL (amps) __1.0
+5V START-UP (amps) __1.0
+5V TYPICAL (amps) ___0.6
TYPICAL (watts) ______15
MAXIMUM (watts) ______59
BUFFERED STEP PULSE RATE (micro sec) _____N/A
WRITE PRECOMP (cyl) ______________________N/A
REDUCED WRITE CURRENT (cyl) ______________N/A
LANDING ZONE (cyl) _______________________AUTO PARK
IBM AT DRIVE TYPE ________________________*
* MAY REQUIRE A CONTROLLER WITH BIOS SUPPORT, OR FORMATTING
AND PARTITIONING SOFTWARE. ALSO, CHECK TO SEE IF YOUR CMOS SETUP
HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE AVAILABLE.
** ESDI controllers which offer an Alternate/Spare sector per track
option will format to a capacity = Cyl*Hd*(SPT-1)*512 bytes
Seagate reserves the right to change, without notice, product
offerings or specifications. (11/11/92)
A copy of this specification file may be obtained
by FTP at
ftp://ftp.seagate.com/techsuppt/esdi/st2106e.txt.
 |
|
