CP340
Customer Options

There are four jumpers available for configuration. Three of the jumpers, E2, E3 and E4 are used to select the drive's SCSI ID, while E1 (installed) disables parity. The following table defines the settings for these jumpers.

E2	E3	E4	Device
OUT	OUT	OUT	0
IN	OUT	OUT	1
OUT	IN	OUT	2
IN	IN	OUT	3
OUT	OUT	IN	4
IN	OUT	IN	5
OUT	IN	IN	6
IN	IN	IN	7

Mounting Holes
Side: 6-32 UNC-2B .12 Max. Insertion Bottom: 6-32 UNC-2B >.25 Max. Insertion