CP3304
Customer Options

C/D
The C/D jumper is used to determine whether the drive is master (drive C) or slave (drive D). The drive is configured as a master (drive C) when jumped and as a slave (drive D) when not jumpered.
DSP & SS This pair of jumpers determines the signals on pin 39 of the interface connector.

Jumper DSP SS		Action
X		-spindle synchronizaation signal disabled on pin 39 -activity LED signal available on pin 39 -Must be in place for CAM/ATA drives.
	X	-spindle synchronization signal enabled on pin 39 -activity LED signal disabled from pin 39
		-pin 39 floating

Jumper
E1	Disable Spin Up until command received
E2	Not used
E3	Not used

CMOS Drive Parameters
Cylinders	659
Heads	16
Sectors	63
Precomp	0
Landing Zone	659

Mounting Holes
Side: 6-32 UNC-2B .12 Max. Insertion Bottom: 6-32 UNC-2B .25 Max. Insertion