CP3100
Customer Options

There are six jumpers available for connfiguration. Three of these jumpers, E1, E2 and E3 are used to select the drive's SCSI ID, while E4 (installed) disables parity. Jumpers E5 and E6 areused to enable either the spindle synchronization signal, or LED, respectively.

The following table defines the settings for jumpers E1, E2, and E3.

E1	E2	E3	SCSI ID
OUT	OUT	OUT	O
IN	OUT	OUT	1
OUT	IN	OUT	2
IN	IN	OUT	3
OUT	OUT	IN	4
IN	OUT	IN	5
OUT	IN	IN	6
IN	IN	IN	7

Mounting Holes
Side: 6-32 UNC-2B .12 Max. Insertion
Bottom: 6-32 UNC-2B .25Max. Insertion