CP3024
Customer Options
There are four jumper options available for configuration: *HSP, C/D, DSP and ACT. The
following table shows what the jumper settings should be for various system
configurations.
Single Drive = ACT and C/D Jumpered
Master Drive = C/D and DSP Jumpered
Slave Drive = No Jumpers installed
* Note: HSP is not used. DOS Drive Type= 2
| J3 |
| 1 |
+12V |
| 2 |
Ground |
| 3 |
Ground |
| 4 |
+5V |
| CMOS Drive Parameters |
| Cylinders |
615 |
| Heads |
4 |
| Sectors |
17 |
| Precomp |
0 |
| Landing Zone |
615 |
| Mounting Holes |
| Side: 6-32 UNC-2B .12 MAX. Insertion |
| Bottom: 6-32 UNC-2B .25 MAX. Insertion |
| 
