CP30100 SCSI

There are three jumpers available for configuration: E1, E2 and E3. These jumpers are used to select the drive's SCSI ID. The following table defines the settings:

SCSI ID	Jumper
0	None
1	E1
2	E2
3	E1&E2
4	E3
5	E1&E3
6	E2&E3

Note: Parity is always Enabled

Mounting Holes

Side: 6-32 UNC-2B .15 MAX. Insertion

Bottom: 6-32 UNC-2B .25 MAX. Insertion