CP3000
Customer Options

There are four jumper options available for configuration: *HSP, C/D, DSP, and ACT.
The following table shows what the jumper settings should be for various system configurations.

Single Drive = ACT and C/D Jumpered
Master Drive = C/D and DSP Jumpered
Slave Drive = No Jumpers installed

* Note: HSP is not used.

J3
1	+12V
2	Ground
3	Ground
4	+5V

J5
1	+5V
2	+12V
3	Ground

CMOS Drive Parameters
Cylinders	980
Heads	5
Sectors	17
Precomp	0
Landing Zone	980

Mounting Holes

Side: 6-32 UNC-2B .12 MAX. Insertion

Bottom: 6-32 UNC-2B .25 MAX. Insertion