CFN170A
Customer Options
The CFN170A drive is designed to operate either as a Master drive (drive C) or a Slave
Drive (drive D). Commands from the host are written in parallel to both drives. When the
C/D jumper on the drive is closed, the drive will assume the role of a master. When C/D is
open, the drive will act as a slave. In Single-drive configurations, C/D must remain in
the closed (master) position.
| CMOS Drive Parameters |
| Cylinders |
326 |
| Heads |
16 |
| Sectors |
63 |
| Precomp |
0 |
| Landing Zone |
326 |
| Mounting Holes |
| Side: 3mmx0.5mm THD(4x) 4mm Max. Insertion |
| Bottom: 3mmx0.5 THD(4x) 4mm Max. Insertion |
|
