CFA340A (CP30344)
Customer Options
The C/D jumper is used to determine whether the drive is a master (drive C) or a slave
(drive D). The drive is configured as a master, when jumpered, and a slave when not
jumpered. The ATA/ISA jumper is used when when daisy-chaining two drives. If another
manufacturer's drive is being connected to the Conner drive, you may need to install this
jumper.
| J6 |
| 1 |
+12 V |
| 2 |
Ground |
| 3 |
Ground |
| 4 |
+5V |
| CMOS Drive Parameters |
| Cylinders |
665 |
| Heads |
16 |
| Sectors |
63 |
| Precomp |
0 |
| Landing Zone |
665 |
| Mounting Holes |
| Side: 6-32 UNC-2B .15 Max. Insertion |
| Bottom: 6-32 UNC-2B .37 Max. Insertion |
|
