CFA170A (CP30174)
Customer Options

The C/D jumper is used to determine whether the drive is a master (drive C) or a slave (drive D). The drive is configured as a master when jumpered, and a slave when not jumpered. The ATA/ISA jumper is used when daisy-chaining two drives. This jumper may have to be removed when this drive is used together with older (pre-ATA) drives.

J6
1	+12 V
2	Ground
3	Ground
4	+5V

J4
1	+5V
2	+12V
3	Ground

CMOS Drive Parameters
Cylinders	332
Heads	16
Sectors	63
Precomp	0
Landing Zone	332

Mounting Holes
Side: 6-32 UNC-2B .15 Max. Insertion
Bottom: 6-32 UNC-2B .22 Max. Insertion