| |
Odd characters? Click here for help. A
version of this specification with the linedraw characters
approximated by text is available by clicking here.
SEAGATE TECHNOLOGY, INC.
1-800-SEAGATE
http://www.seagate.com
(C)opyright 1997
ST-36531A (Medalist 6531 Ultra ATA-3)
ÉÍÍÍÍÍÍÍÍÍÍÍ»
º REAR VIEW º
ÈÍÍÍÍÍÍÍÍÍÍͼ
J2 40 pin I/O Cable Connection
³ pin-20 removed
³
ÕÍÍÍÍÍÍÍÍÍ ³ÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍ1Í/ÄÄÄÄÄÄÄÄÄ\ TOP (HDA)
͵::::::::::ú::::::::1³ : : : : ³ 0 0 0 0 ³ÍÍ
ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏ8³Í³Í³Í³ÍÀÄ5ÄGÄGÄ12Ù BOTTOM
³ ³ ³ ³
Master ON, Slave OFF ÄÄÙ ³ ³ ³
Slave Present (when Master ON) ÄÄÄÄ´ ³ ³
Cable Select (when Slave OFF) ÄÄÄÄÙ ³ ³
Reserved ÄÄÄÄÄÄÙ ³
Limit capacity ÄÄÄÄÄÄÄÄÙ
Limit Capacity jumper sets the default cylinder translation
to 4092 to solve issues with certain BIOS that only auto-detect.
Total available sectors are still at full capacity as reported via
Identify Drive data words 52 - 61. Third party partitioning software
may be needed to achieve full capacity if this option jumper is used.
ST-36531A
Medalist 6531 AT
FORMATTED CAPACITY (MB) __________________6505
ACTUATOR TYPE ____________________________VOICE COIL
CYLINDERS __PHYSICAL______________________
HEADS ______PHYSICAL______________________6
DISCS (3.5 in) ___________________________3
MEDIA TYPE _______________________________THIN FILM
HEAD TYPE ________________________________MR
RECORDING METHOD _________________________PRML 16/17 (0,14) ZBR
INTERNAL TRANSFER RATE (Mbits/sec) _______up to 140
EXTERNAL TRANSFER RATE (Mbytes/sec) ______up to 33.3
PIO/DMA/UDMA MODE (max) __________________4/2/2
DMA SUPPORT ______________________________EISA Type B
SPINDLE SPEED (RPM) ______________________5400
AVERAGE LATENCY (mSEC) ___________________5.6
BUFFER ___________________________________128K
Read/Write Multiple, Read Look-Ahead,
Multi-Segmented
INTERFACE ________________________________Ultra ATA-3
SECTORS PER DRIVE (LBA mode) _____________12,706,470
TPI (TRACKS PER INCH) ____________________9190
BPI (KBITS PER INCH) _____________________up to 153.8
AVERAGE ACCESS (ms seek/read/write) ______/11.0/11.5
SINGLE TRACK SEEK (ms seek/read/write) ___/1.3/1.7
MAX FULL SEEK (ms seek/read/write) _______/19.8/20.2
MTBF (power-on hours) Office _____________400,000
SHOCK (G's, 11ms/2ms):
operating (Read/Write) __________15
abnormal ________________________
nonoperating ____________________75/200
ACOUSTICS (bels) (typ/max) _______________3.3/4.2
POWER DISSIPATION (watts) ________________
POWER REQUIREMENTS: +12V START-UP (amps) _1.8
POWER MANAGEMENT (Watts):
ACTIVE _______________9.1
IDLE _________________4.9
STANDBY ______________0.9
WRITE PRECOMP (cyl) ______________________N/A
REDUCED WRITE CURRENT (cyl) ______________N/A
LANDING ZONE (cyl) _______________________AUTO
IBM AT DRIVE TYPE ________________________*
Physical:
Height (inches/mm): 1.03/26.1
Width (inches/mm): 4.01/101.85
Depth (inches/mm): 5.78/147.0
Weight (lb/g): 1.2/544
* MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE. ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)
Possible translations:
This translation is generally acceptable, as
is, for non-DOS operating systems:
13446 cyl, 15 heads, 63 sectors = 6,505,712,640
DOS operating systems may require a translation
that uses larger values for the CMOS head
parameter which lowers cylinders below 1024:
840 cyl, 240 heads, 63 sectors = 6,502,809,600
Other FULL-CAPACITY solutions for DOS operating
systems include third-party drive preparation
software, system BIOS which supports LBA mode
or bios driven host adapters. Otherwise,
capacity may be limited to:
1024 cyl, 16 heads, 63 sectors = 528,482,304
Some systems BIOS have capacity limitations.
Types that have been identified are:
a 2.113GB or 4095 cylinder limitation
a 3.262GB or 6322 cylinder limitation
a 4.22GB or 8192 cylinder limitation
and, if exceeded, may cause the system to hang during boot, or
it can truncate or wrap the cylinders when auto-detect options
set in the CMOS.
DOS cannot access more than 2.147 Gbytes per partition. Create
two partitions to access the drive's full capacity.
Note: A "custom" or "user-defined" CMOS drivetype may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder. A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".
Already low-level formatted at the factory.
Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.
Seagate reserves the right to change, without notice, product
offerings or specifications. (03/19/99)
A copy of this specification file may be obtained
by FTP at
ftp://ftp.seagate.com/techsuppt/at/st36531a.txt.
 |
|