| |
Odd characters? Click here for help. A
version of this specification with the linedraw characters
approximated by text is available by clicking here.
SEAGATE TECHNOLOGY, INC.
1-800-SEAGATE
http://www.seagate.com
(C)opyright 1995
ST-3630A (Medalist 630xe AT)
TOP 4-pin DC
Power
ÕĶĶĶĶĶĶĶĶĶĶ ĶĶĶĶĶĶĶĶĶø/Ä4Ä3Ä2Ä1Ä\
ĶĶĶĶĶĶĶĶĶ͵::::::::::ł::::::::1Ƴ 0 0 0 0 ĘĶ
ŌĶĶĶĶĶĶĶĶĶĶŃĶĶĶĶĶĶĶĶ;ĄÄ5ÄGÄGÄ12Ł
(pin-20 missing
for keying purposes)
(Options jumper located on bottom) (back of drive)
Master OFF, Slave ON ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 8o-o7 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 0 0 1
Slave Present ON (standard) ÄÄÄÄÄÄÄÄÄ o-o ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 0 1 0
ŚÄÄÄ - - - o-o ³ ³ ³
Cable Select ÄÄÄÄÄÄÄÄÄÄÄÄÄÄŁ ŚÄ Ä Ä Ä 2o-o1 S M S
Slave Present ON for ÄÄÄÄÄÄÄÄŁ (front of drive) i a l
drives that don't have n s a
the -DASP signal (use g t v
only ONE of the Slave l e e
Present choices) e r
Spare jumper stored on pins 1-3
ST-3630A
Medalist 630xe
FORMATTED CAPACITY _______________________631.1
ACTUATOR TYPE ____________________________VOICE COIL
CYLINDERS __PHYSICAL______________________
HEADS ______PHYSICAL______________________4
DISCS (3.5 in) ___________________________2
MEDIA TYPE _______________________________THIN FILM
HEAD TYPE ________________________________THIN FILM
RECORDING METHOD _________________________ZBR RLL (1,7)
INTERNAL TRANSFER RATE (Mbits/sec) _______22.9 to 39.6
EXTERNAL TRANSFER RATE (Mbytes/sec) ______up to 11.1
PIO MODE _________________________________3
DMA SUPPORT ______________________________EISA Type B
SPINDLE SPEED (RPM) ______________________3,811
AVERAGE LATENCY (mSEC) ___________________7.87
BUFFER ___________________________________120 Kbyte
Read/Write Multiple, Read Look-Ahead,
Multi-Segmented
INTERFACE ________________________________ATA
SECTORS PER DRIVE (LBA mode) _____________1,232,784
TPI (TRACKS PER INCH) ____________________3,384
BPI (KBITS PER INCH) _____________________68
AVERAGE ACCESS (ms) ______________________14
SINGLE TRACK SEEK (ms) ___________________5
MAX FULL SEEK (ms) _______________________34
MTBF (power-on hours) Office _____________300,000
SHOCK (G's):
operating (Read/Write) __________2
abnormal ________________________10
nonoperating ____________________75
ACOUSTICS (dBA) (typ/max) ________________29/33
POWER DISSIPATION (watts) ________________
POWER REQUIREMENTS: +12V START-UP (amps) _1.2
POWER MANAGEMENT (Watts):
ACTIVE _______________5.23
IDLE _________________1.86
STANDBY ______________0.725
WRITE PRECOMP (cyl) ______________________N/A
REDUCED WRITE CURRENT (cyl) ______________N/A
LANDING ZONE (cyl) _______________________AUTO
IBM AT DRIVE TYPE ________________________*
Physical:
Height (inches/mm): 1.02/25.4
Width (inches/mm): 4.02/102.1
Depth (inches/mm): 5.78/146.6
Weight (lbs/kg): 1.3/0.59
* MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE. ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)
Possible translations:
This translation is generally acceptable, as
is, for non-DOS operating systems:
1223 cyl, 16 heads, 63 sectors = 631,185,408
DOS operating systems may require a system bios
that accepts larger values for the CMOS head
parameter which lowers cylinders below 1024:
611 cyl, 32 heads, 63 sectors = 630,669,312
Other FULL-CAPACITY solutions for DOS operating
systems include third-party drive preparation
software, system BIOS which supports LBA mode
or bios driven host adapters. Otherwise,
capacity may be limited to:
1024 cyl, 16 heads, 63 sectors = 528,482,304
Note: A "custom" or "user-defined" CMOS drivetype may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder. A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".
PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION
ZBR = Zone Bit Recording = Variable sectors per track
Already low-level formatted at the factory.
Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.
Seagate reserves the right to change, without notice, product
offerings or specifications. (03/13/96)
A copy of this specification file may be obtained
by FTP at
ftp://ftp.seagate.com/techsuppt/at/st3630a.txt.
 |
|