| |
Odd characters? Click here for help. A
version of this specification with the linedraw characters
approximated by text is available by clicking here.
SEAGATE TECHNOLOGY, INC.
1-800-SEAGATE
http://www.seagate.com
(C)opyright 1996
ST-32531A, Medalist 2531 AT
ÉÍÍÍÍÍÍÍÍÍÍÍ»
º REAR VIEW º
ÈÍÍÍÍÍÍÍÍÍÍͼ
J2 40 pin I/O Cable Connection
³
ÕÍÍÍÍÍÍÍÍÍ ÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍ1Í/ÄÄÄÄÄÄÄÄÄ\ TOP (HDA)
͵::::::::::ú::::::::1³ : : : ³ 0 0 0 0 ³ÍÍ
ÔÍÍÍÍÍÍÍÍÍͳÍÍÍÍÍÍÍÍÍÏͳͳͳÍÀÄ5ÄGÄGÄ12Ù BOTTOM
³ ³ ³ ³
pin-20 removed ÄÙ ³ ³ ÀÄÄ Reserved
³ ÃÄÄÄÄ Slave Present (when Master ON)
³ ÀÄÄÄÄ Cable Select (when Slave OFF)
2o o ÀÄÄÄÄÄÄ Master ON, Slave OFF
1o o
³ ³
³ ÀÄÄ Full capacity (as shipped)
ÀÄÄÄÄ Limit capacity to 2.1 Gbytes (4092 cylinders)
Limit Capacity jumper sets the default cylinder translation
to 4092 to solve issues with certain BIOS that only auto-detect.
Total available sectors are still at full capacity as reported via
Identify Drive data words 52 - 61. Third party partitioning software
may be needed to achieve full capacity if this option jumper is used.
ST-32531A
Medalist 2531 AT
FORMATTED CAPACITY _______________________2557
ACTUATOR TYPE ____________________________VOICE COIL
CYLINDERS __PHYSICAL______________________
HEADS ______PHYSICAL______________________6
DISCS (3.5 in) ___________________________3
MEDIA TYPE _______________________________THIN FILM
HEAD TYPE ________________________________THIN FILM
RECORDING METHOD _________________________ZBR 2/3 (1,7)RLL
INTERNAL TRANSFER RATE (Mbits/sec) _______up to 88
EXTERNAL TRANSFER RATE (Mbytes/sec) ______up to 16.6
PIO MODE _________________________________4
DMA SUPPORT ______________________________EISA Type B
SPINDLE SPEED (RPM) ______________________4500
AVERAGE LATENCY (mSEC) ___________________6.67
BUFFER ___________________________________128K
Read/Write Multiple, Read Look-Ahead,
Multi-Segmented
INTERFACE ________________________________Fast ATA-2
SECTORS PER DRIVE (LBA mode) _____________4,995,648
TPI (TRACKS PER INCH) ____________________5104
BPI (KBITS PER INCH) _____________________108.7
AVERAGE ACCESS (ms read/write) ___________12.5/14.5
SINGLE TRACK SEEK (ms read/write) ________2.5/3.5
MAX FULL SEEK (msread/write) _____________24/25
MTBF (power-on hours) Office _____________300,000
SHOCK (G's):
operating (Read/Write) __________5
abnormal ________________________
nonoperating ____________________75
ACOUSTICS (dBA) (typ/max) _______________37/45
POWER DISSIPATION (watts) ________________
POWER REQUIREMENTS: +12V START-UP (amps) _1.6
POWER MANAGEMENT (Watts):
ACTIVE _______________4.6
IDLE _________________4.5
STANDBY ______________1.0
WRITE PRECOMP (cyl) ______________________N/A
REDUCED WRITE CURRENT (cyl) ______________N/A
LANDING ZONE (cyl) _______________________AUTO
IBM AT DRIVE TYPE ________________________*
Physical:
Height (inches/mm): 1.03/26.2
Width (inches/mm): 4.01/102.1
Depth (inches/mm): 5.78/146.9
Weight (lbs/g): 1.25/567.5
* MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE. ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)
Possible translations:
This translation is generally acceptable, as
is, for non-DOS operating systems:
4956 cyl, 16 heads, 63 sectors = 2,557,771,776
DOS operating systems may require a translation
that uses larger values for the CMOS head
parameter which lowers cylinders below 1024:
619 cyl, 128 heads, 63 sectors = 2,555,707,392
Other FULL-CAPACITY solutions for DOS operating
systems include third-party drive preparation
software, system BIOS which supports LBA mode
or bios driven host adapters. Otherwise,
capacity may be limited to:
1024 cyl, 16 heads, 63 sectors = 528,482,304
Some systems BIOS have capacity limitations.
Types that have been identified are:
a 2.113GB or 4095 cylinder limitation
a 3.262GB or 6322 cylinder limitation
and, if exceeded, may cause the system to hang during boot, or
it can truncate or wrap the cylinders when auto-detect options
set in the CMOS.
DOS cannot access more than 2.147 Gbytes per partition. Create
two partitions to access the drive's full capacity.
Note: A "custom" or "user-defined" CMOS drivetype may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder. A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".
Already low-level formatted at the factory.
Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.
Seagate reserves the right to change, without notice, product
offerings or specifications. (05/21/97)
A copy of this specification file may be obtained
by FTP at
ftp://ftp.seagate.com/techsuppt/at/st32531a.txt.
 |
|