Odd characters? Click here for help. A version of this specification with the linedraw characters approximated by text is available by clicking here.

                         SEAGATE TECHNOLOGY, INC.
                              1-800-SEAGATE
                          http://www.seagate.com
                            (C)opyright 1991







           TOP       ฺฤ 44-pin I/O Connector (* see below)
                     ณ                      ฺฤฤ Factory test
                     ณ                     oมo
                   ::::::::::::๙::::::::1  o o
              อPอWอAอออออออออออุออออออออออออออออออ
                               ณ                ฺฤ this specific pin not used
    pin-20 removed for keying ฤู      Cable ฤาo o
                                     Select  ำo=o ฤฤ Master ON, Slave OFF
                                              ณ
                                     (Front)  ภฤฤ pin common to Master or
                                                   Cable Select (90๘)

 * Drive uses +5vdc power supplied to the drive
   via the interface connector. The drive does
   NOT make use of a +12vdc power line.
   pin-41  +5vdc (Logic)
   pin-42  +5vdc (Motor)
   pin-43  Ground
   pin-44  Reserved


CP2034       31.9    411   4   38   3486    32   19.0   1.3   Pancho
CP2044PK     42.6    980   5   17   3486    32   19.0   1.5   Pancho


Note: A "custom" or "user-defined" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

 * Two spare sectors per cylinder, 2 spare cylinders per unit.

** MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)

PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION
ZBR = Zone Bit Recording = Variable sectors per track

Already low-level formatted at the factory.

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.

Seagate reserves the right to change, without notice, product 
offerings or specifications. (8/30/91)

A copy of this specification file may be obtained by FTP at
ftp://ftp.seagate.com/techsuppt/conner/poncho_cp2044pk.txt.